Perhitungan Biaya Produksi Alat Muat dan Angkut di Pit Mudak PT Teknik Alum Service
Calculation Of Production Cost Of Loading And Hauling Equipment At Mudak Pit Of PT Teknik Alum Service
DOI:
https://doi.org/10.58227/jesta.v3i1.212Keywords:
Cost components, equipment cost calculations, production targetsAbstract
PT Teknik Alum Service is a company that mines nickel ore located in Buleleng.
Village, Bungku Pesisir District, Morowali Regency, Central Sulawesi Province. The costs of loading and transporting nickel from the mine to the jetty using loading and transportation equipment are carried out to determine the components of production operating costs. Production costs are costs incurred during the production process. To produce large tool productivity for the company, of course, it is necessary to calculate the production costs of using the tool based on the production target plan that has been determined by the company. From this identification, the objectives of this research are as
Follows: a. find out how much loading and conveyance equipment is produced at the Mudak Pit, b. Find out how much the production costs of loading equipment and conveyance are profitable for the company. PT Teknik Alum Service Teknik Alum Service has a monthly production target of 50,000 tons/month.
References
Arif, Irwandy, 2018, Nikel Indonesia. Gramedia Pustaka Utama
Astaty, 2019, PT Anugrah Alam Buana Indonesia Kabupaten Bombana Provinsi Sulawesi Tenggara Efisiensi Tentang Kerja Alat Mekanik untuk Mencapai Target Produksi Row Material.
Butt, C. R. M. & Zeegers, H., 1992, Regolith Exploration Geochemistry in Tropical and Subtropical Terrains. 1st ed. Amsterdam: Elsevier Science.
Fariq, M. A., Zaenal, Dan Yuliadi. 2016, Kajian Teknis Alat Gali-Muat Dan Alat Angkut Pada Kegiatan Penambangan Nikel Di PT. Antam (Persero) Tbk, Desa Buli Kecamatan Maba Kabupaten Halmahera Timur Provinsi Maluku Utara Technical Review Of Load-Drilling Equipment And Transport Tools In Nickel. Prosiding Teknik Pertambangan, Issn 2460-6499:52–62
Kadarusman, A., Miyashita, S., Maruyama, S., Parkinson, C.D., Ishikawa, A., 2004, Petrology, Geochemistry and Paleogeographic Reconstruction of the East Sulawesi Ophiolite, Indonesia, Tectonophysics 392:55-83.
Perdana, C. B. 2022., Estimasi Penentuan Jumlah Alat Muat Dan Alat Angkut Dalam Memenuhi Target Produksi Pada PT. Akar Mas Internasional Kecamatan Pomala Kabupaten Kolaka Provinsi Sulawesi Tenggara
Sefrizni, R. 2018, Analisis Kebutuhan Alat Gali Muat Dan Alat Angkut Menggunakan Simulasi Teori Antrian Pada Produksi Overburden Di PT. Haswi Kencana Indah Kecamatan Sumay, Kabupaten Tebo Provinsi Jambi. Universitas Negeri Padang. Padang
Setiawan, A. B, 2016, PT Sinar Krya Musti, Kecamatan Pulau Gebe, Kabupaten Halmahera Tengah, Studi Tentang Biaya Operasional Excavator JCB JS205LC Pengangkutan Bijih Nikel.
Silaban, Rosalina. 2020. Studi Estimasi Biaya Produksi Penambangan Antara Sewa Dengan Kepemilikan Alat Pada PT. Ariano Bintang Cemerlang, Site PT Ceria Nugraha Indotama Kabupaten Kolaka Provinsi Sulawesi Tenggara
Simandjuntak, T.O., Rusmana, E., Supandjono, J.B., Koswara, A. 1980. Peta Geologi Lembar Bungku, Sulawesi, Skala 1:250.000. Pusat Penelitian Dan Pengembangan Geologi, Bandung.
Suratman, 2000, Geology and Nikel Laterit Weathering Deposits in The South East Arm Of Sulawesi, Berita Sedimentology, Jakarta
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Journal of Engineering Science and Technology Applications
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
