Analisis Kebutuhan Alat Angkut Dump Truck HD 985 Pada Kegiatan Long-Haul Pengangkutan SSP
Analysis of the Need for Dump Truck Conveyance Equipment HD 985 in the Long-Haul Activities of SSP Transportation
DOI:
https://doi.org/10.58227/jesta.v1i1.69Keywords:
mechanical equipment, production, screening station product (SSP), Conveyance, Dump trucksAbstract
Mining activities must always be supported by mechanical equipment that can work optimally to create satisfactory results with minimal cost and effort. Periodic control must also always be carried out because it relates to the company's production target. This research aims to determine the production of the HD985 dump truck conveyance and obtain the amount of lift needed for screening station product (SSP) transportation activities. This research was conducted using data collection methods in the field, discussions with several employees, and existing literature. Then processing is carried out by calculating data from the area using a specific formula and then analyzing the results of the calculations that have been obtained. Based on estimates, it was found that the production of the HD985 dump truck conveyance reached 69.46 tons/hour. And for the number of rides needed with a target tonnage of 1,000 tons, namely 2 units, for a target of 2,000 tons, 4 units are required; for a target of 3,000 tons, 6 units are needed, for a target of 4,000 tons, 8 units are required, for a target of 5,000 tons, 10 teams are needed.
References
Djamaluddin, D., Mulhadramy, M., & Jafar, N. (2022). Comparative Analysis of Mined Reserve Tonnage on “M” Hill Between Mine Plan and Mining Realization. Journal of Geology and Exploration, 1(1), 22–29. https://doi.org/10.58227/JGE.V1I1.6
Fadli, F. (2016). DESAIN PIT PENAMBANGAN BATUBARA BLOK C PADA PT. INTIBUANA INDAH SELARAS KABUPATEN NUNUKAN PROVINSI KALIMANTAN UTARA. Jurnal Geomine, 1(1). https://doi.org/10.33536/jg.v1i1.10
Habibie, A., Widodo, S., Alim, M. N., Umar, E. P., Lantara, D., Nurwaskito, A., & Thamsi, A. B. (2019). Analisis Losses pada Pemindahan Material LGSO di Front Penambangan. Jurnal Geomine, 7(3), 212–218. https://doi.org/10.33536/jg.v7i3.295
Husain, J. R., Normansyah, N., & Bakri, H. (2022). Structure Control of Iron Ore Education on Sebuku Island. Journal of Geology and Exploration, 1(1), 8–12. https://doi.org/10.58227/JGE.V1I1.2
Jafar, N., Wahid R, H., & Widodo, S. (2022). Classification of Ni Levels for Determination Cut-Off Grade in Region X. Journal of Geology and Exploration, 1(1), 1–7. https://doi.org/10.58227/JGE.V1I1.3
Nurwaskito, A. (2015). OPTIMALISASI PRODUKTIVITAS ALAT MUAT DAN ALAT ANGKUT DALAM MENCAPAI TARGET PRODUKSI PADA PT. SEMEN BOSOWA KABUPATEN MAROSPROVINSI SULAWESI SELATAN. Jurnal Geomine, 2(1). https://doi.org/10.33536/jg.v2i1.34
Ramadhan Shaddad, A. (2017a). ANALISIS KESERASIAN ALAT MEKANIS (MATCH FACTOR) UNTUK PENINGKATAN PRODUKTIVITAS. Jurnal Geomine, 4(3). https://doi.org/10.33536/jg.v4i3.74
Ramadhan Shaddad, A. (2017b). ANALISIS KESERASIAN ALAT MEKANIS (MATCH FACTOR) UNTUK PENINGKATAN PRODUKTIVITAS. Jurnal Geomine, 4(3). https://doi.org/10.33536/jg.v4i3.74
Shabiruddin, S., Anshariah, A., & Bakri, H. (2022). Calculation of PIT 4 Coal Reserves with Cross-Cross Method. Journal of Geology and Exploration, 1(1), 13–17. https://doi.org/10.58227/JGE.V1I1.4
Supratman, S., Anshariah, A., & Bakri, H. (2017). PRODUKTIVITAS KINERJA MESIN BOR DALAM PEMBUATAN LUBANG LEDAK DI QUARRY BATUGAMPING B6 KABUPATEN PANGKEP PROPINSI SULAWESI SELATAN. Jurnal Geomine, 5(2). https://doi.org/10.33536/jg.v5i2.127
Thamsi, A. B. (2017). Estimasi Cadangan Terukur Endapan Nikel Laterit Cog 2,0% Menggunakan Metode Inverse Distance Pada Pt. Teknik Alum Service, Blok X. Jurnal Geomine, 4(3), 128–130. https://doi.org/10.33536/jg.v4i3.77
Thamsi, A. B., Jafar, N., & Fauzie, A. (2021). Analisis Pengaruh Morfologi Pada Pembentukan Nikel Laterit PT Prima Sentosa Alam Lestari Kabupaten Morowali Provinsi Sulawesi Tengah. Jurnal GEOSAPTA, 7(2), 75–78. https://doi.org/10.20527/jg.v7i2.9114
Thamsi, A. B., Sangadji, C. D., Nurhawaisyah, S. R., Aswadi, M., & Amsah, L. O. M. Y. (2022). ANALISIS PERBANDINGAN KADAR NIKEL HASIL PENGEBORAN DENGAN HASIL PENAMBANGAN DI PT MANDIRI MINERAL PERKASA. Jurnal Pertambangan, 6(2), 65–70. https://doi.org/10.36706/JP.V6I2.1098
Wakila, M. H., Thamsi, A. B., Umar, E. P., Yusuf, F. N., & Bakhri, S. (2022). KAJIAN KUALITAS ENDAPAN ASPAL DI DESA WAANGU-ANGU DAN DESA LAWELE, KABUPATEN BUTON. Jurnal Pertambangan, 6(2), 60–64. https://doi.org/10.36706/JP.V6I2.1013
Yogi Pranata, R., Djamaluddin, D., Asmiani, N., & Thamsi, A. B. (2017). Analisis Perbandingan Kadar Nikel Berdasarkan Perencanaanterhadap Realisasi Penambangan. Jurnal Geomine, 5(3), 143–146. https://doi.org/10.33536/jg.v5i3.146
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Journal of Engineering Science and Technology Applications
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
