Identifikasi Bahaya Dan Pengendalian Risiko Sebagai Upaya Mencegah Dan Mengurangi Risiko Kecelakaan Kerja Pada Tambang Batubara Provinsi Kalimantan Timur

Muh. Heri Azis; Anshariah Anshariah; Arif Nurwaskito

doi:10.58227/jmi.v1i1.33

Authors

Muh. Heri Azis
Anshariah Anshariah Universitas Muslim Indonesia
Arif Nurwaskito Universitas Muslim Indonesia

DOI:

https://doi.org/10.58227/jmi.v1i1.33

Keywords:

inspection, identification, potential hazards, risk assessment, evaluation

Abstract

Occupational safety and health is a problem that has always been related to the world of work since the beginning of the industrial world began is the emergence of work accidents in their activities that have the potential to cause hazards and work accidents such as property damage, lost time injury to cause fatality . The purpose of this study is to determine the identification of hazards and control the risk of work accidents based on the determination of the risk value of the source of hazard and appropriate control to reduce and eliminate the risk of hazards. The research method carried out is to descriptively describe the situation or object in facts with direct observation. The first thing to do is to find the source of danger using hazard source data, potential hazard data, and K3LH performance report data, then hazard identification and risk assessment based on OHSAS references. Hazards that have been identified are evaluated for risk level. The results of the study found the source of danger that often occurs, namely the concentration of very thick dust and the absence of warning signs. Based on the results of the study, the evaluation carried out is to identify hazards based on the source of hazards obtained in the field and assess and control the source of hazards to reduce the risk of work accidents. From the assessment results, 4 types of risks were obtained, namely four near-miss risks, four property damage risks, three lost time injury risks, and three fatality risks. Conclusions Based on the results of hazard identification and risk control, the hazards that must be prioritized are the risk of fatality and the risk of lost time injury.

References

Anwar, H., Anshariah, A. S. M., Umar, E. P., Nurwaskito, A., & Adi, S. A. (2020). EVALUASI GEOMETRI JALAN ANGKUT TAMBANG DARI STOCKPILE TANJUNG GUNUNG KE PIT DAMAR SELATAN PADA PENAMBANGAN BATUBARA DI PT SEBUKU IRON LATERITIC ORES (SILO) KALIMANTAN SELATAN. Jurnal GEOSAPTA Vol, 6(1).

Budiono, A. S. (1992). Bunga rampai hiperkes dan keselamatan kerja. Tri Tunggal Tata Fajar.

Makmur, P. B. (2003). Modul Identifikasi Bahaya, Penilaian dan Pengendalian Resiko.

Ramli, S. (2010). Sistem manajemen keselamatan dan kesehatan kerja OHSAS 18001. Jakarta: Dian Rakyat.

Wangi, V. K. N., Bahiroh, E., & Imron, A. (2020). Dampak Kesehatan Dan Keselamatan Kerja, Beban Kerja, Dan Lingkungan Kerja Fisik Terhadap Kinerja Karyawan. Jurnal Manajemen Bisnis, 7(1), 40-50.

Kadar, M. I., Widodo, S., Budiman, A. A., & Prianata, Y. L. O. (2022). Kajian Pengaruh Kondisi Tempat Kerja Terhadap Produktivitas Alat Mekanis pada Kegiatan Pengupasan Overburden. Mining Science and Technology Journal, 1(1), 31-37.

Mustofa, A., Akbar, B. M., Nurhakim, N., & Sariffudin, S. (2019). Analisis Pengaruh Tingkat Pelayanan Jalan Terhadap Keselamatan Kerja Pada Tambang Batubara. Jurnal Himasapta, 1(03).

Busyairi, M., Tosungku, L. O. A. S., & Oktaviani, A. (2014). Pengaruh keselamatan kerja dan kesehatan kerja terhadap produktivitas kerja karyawan.

Herlina, Y., & Asih, W. M. (2022). GAMBARAN PENGETAHUAN DAN SIKAP PEKERJA TAMBANG BATUBARA TENTANG KESELAMATAN KERJA DI PT. SURYA ANUGRAH SEJAHTERA PROV. JAMBI. Ensiklopedia of Journal, 4(4), 165-168.

Rahmawati, A., Dewi, R. S., & Tanau, M. U. (2020). Pengaruh Persepsi Lingkungan Kerja Fisik terhadap Kesehatan Keselamatan Kerja (K3) Karyawan Lapangan PT Antang Gunung Meratus. Jurnal Kognisia, 3(1), 166-173.